Files
2026-07-21 22:04:21 -07:00

48 lines
1.2 KiB
OpenSCAD

include <BOSL2/std.scad>
lap_height = 127;
lap_depth = 9;
wall_width = 500;
ring_outer = 120;
ring_inner = 60;
ring_thickness = lap_depth + 2;
ring_offset = -15; // -15 for left light, -55 for right light
screw_diameter = 6.5;
screw_center_offset = 45;
$fn = 200;
module lap_plank() {
// Define the triangular profile for the siding
// We use a polygon for the wedge shape
path = [[0, 0], [lap_depth, 0], [0, lap_height], [0, 0]];
// Sweep the profile across the width of the wall
linear_extrude(wall_width) polygon(path);
}
module back_pattern() {
translate([0,-lap_height/2,-wall_width/2])
ycopies(lap_height, l=wall_width)
lap_plank();
}
difference() {
translate([0,ring_offset,0])
difference() {
xcyl(l=ring_thickness, d=ring_outer, anchor=LEFT);
xcyl(l=ring_thickness, d=ring_inner, anchor=LEFT);
}
group() {
back_pattern();
/* screw holes */
translate([0,ring_offset,0]) rotate([45,0,0]) group() {
translate([0,0,screw_center_offset]) xcyl(d=screw_diameter, l=4*ring_thickness);
translate([0,0,-screw_center_offset]) xcyl(d=screw_diameter, l=4*ring_thickness);
}
}
}