48 lines
1.2 KiB
OpenSCAD
48 lines
1.2 KiB
OpenSCAD
include <BOSL2/std.scad>
|
|
|
|
lap_height = 127;
|
|
lap_depth = 9;
|
|
wall_width = 500;
|
|
|
|
ring_outer = 120;
|
|
ring_inner = 60;
|
|
ring_thickness = lap_depth + 2;
|
|
ring_offset = -15; // -15 for left light, -55 for right light
|
|
|
|
screw_diameter = 6.5;
|
|
screw_center_offset = 45;
|
|
|
|
$fn = 200;
|
|
|
|
module lap_plank() {
|
|
// Define the triangular profile for the siding
|
|
// We use a polygon for the wedge shape
|
|
path = [[0, 0], [lap_depth, 0], [0, lap_height], [0, 0]];
|
|
|
|
// Sweep the profile across the width of the wall
|
|
linear_extrude(wall_width) polygon(path);
|
|
}
|
|
|
|
module back_pattern() {
|
|
translate([0,-lap_height/2,-wall_width/2])
|
|
ycopies(lap_height, l=wall_width)
|
|
lap_plank();
|
|
}
|
|
|
|
difference() {
|
|
translate([0,ring_offset,0])
|
|
difference() {
|
|
xcyl(l=ring_thickness, d=ring_outer, anchor=LEFT);
|
|
xcyl(l=ring_thickness, d=ring_inner, anchor=LEFT);
|
|
}
|
|
group() {
|
|
back_pattern();
|
|
|
|
/* screw holes */
|
|
translate([0,ring_offset,0]) rotate([45,0,0]) group() {
|
|
translate([0,0,screw_center_offset]) xcyl(d=screw_diameter, l=4*ring_thickness);
|
|
translate([0,0,-screw_center_offset]) xcyl(d=screw_diameter, l=4*ring_thickness);
|
|
}
|
|
}
|
|
}
|