Compare commits
4
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
|
|
31183d534b | ||
|
|
7ef00c5f67 | ||
|
|
321ff6456e | ||
|
|
be2a25175b |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 29 KiB |
@@ -0,0 +1,29 @@
|
||||
/* https://github.com/BelfrySCAD/BOSL2 */
|
||||
include <BOSL2/std.scad>
|
||||
|
||||
width = 15;
|
||||
height = 34.5;
|
||||
depth = 18.75;
|
||||
thickness = 2;
|
||||
rounding = 2;
|
||||
hole_diameter = 4.5;
|
||||
|
||||
$fn = 150;
|
||||
|
||||
|
||||
difference() {
|
||||
group() {
|
||||
translate([0,0,(depth+thickness)/2])
|
||||
cuboid([width,height+2*thickness,depth+thickness], rounding=rounding, edges=[TOP+BACK,TOP+FWD]);
|
||||
translate([0,(height+width)/2+thickness,thickness/2])
|
||||
cuboid([width,width,thickness], rounding=rounding, edges=[BACK+RIGHT,BACK+LEFT]);
|
||||
}
|
||||
group() {
|
||||
translate([0,0,depth/2])
|
||||
cuboid([2*width,height,depth], rounding=rounding, edges=[TOP+BACK,TOP+FWD]);
|
||||
translate([0,-(height+thickness)/2,thickness/2])
|
||||
cuboid([2*width,thickness,thickness]);
|
||||
translate([0,(height+width)/2+thickness,0])
|
||||
cylinder(h=thickness, d=hole_diameter);
|
||||
}
|
||||
}
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 24 KiB |
@@ -1,19 +1,26 @@
|
||||
/* https://github.com/BelfrySCAD/BOSL2 */
|
||||
include <BOSL2/std.scad>
|
||||
|
||||
fan_size = 80;
|
||||
fan_size = 80; // [40,60,80,92,120]
|
||||
// Thickness of plate that attaches to the fan
|
||||
plate_thickness = 2;
|
||||
|
||||
mounting_hole_offset = 71.5/2;
|
||||
mounting_hole_diameter = 4.5;
|
||||
|
||||
shroud_length = 25;
|
||||
// Length of shroud between fan and GPU
|
||||
shroud_length = 30;
|
||||
// Thickness of shroud wall
|
||||
shroud_thickness = 4;
|
||||
shroud_offset_v = 0; // positive = fan to the bottom
|
||||
shroud_offset_h = 0; // positive = fan to the right
|
||||
|
||||
// Vertical shroud offset, 0 = flush at the bottom, positive number = fan towards the bottom
|
||||
shroud_offset_v = 0;
|
||||
// Horizontal shroud offset, 0 = centered, positive number = fan towards the right
|
||||
shroud_offset_h = 0;
|
||||
|
||||
fan_diameter = fan_size-2;
|
||||
|
||||
/* [Hidden] */
|
||||
|
||||
mounting_hole_diameter = 4.4;
|
||||
|
||||
gpu_width = 18.7;
|
||||
gpu_height = 54.5;
|
||||
gpu_length = 15;
|
||||
@@ -70,8 +77,21 @@ difference() {
|
||||
/* Mounting holes */
|
||||
for (i = [-1, 1]) {
|
||||
for (j = [-1, 1]) {
|
||||
translate([i * mounting_hole_offset, j * mounting_hole_offset, 0])
|
||||
cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true);
|
||||
if(fan_size == 40) let(mounting_hole_offset=32/2)
|
||||
translate([i * mounting_hole_offset, j * mounting_hole_offset, 0])
|
||||
cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true);
|
||||
if(fan_size == 60) let(mounting_hole_offset=50/2)
|
||||
translate([i * mounting_hole_offset, j * mounting_hole_offset, 0])
|
||||
cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true);
|
||||
if(fan_size == 80) let(mounting_hole_offset=71.5/2)
|
||||
translate([i * mounting_hole_offset, j * mounting_hole_offset, 0])
|
||||
cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true);
|
||||
if(fan_size == 92) let(mounting_hole_offset=82/2)
|
||||
translate([i * mounting_hole_offset, j * mounting_hole_offset, 0])
|
||||
cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true);
|
||||
if(fan_size == 120) let(mounting_hole_offset=105/2)
|
||||
translate([i * mounting_hole_offset, j * mounting_hole_offset, 0])
|
||||
cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Binary file not shown.
@@ -0,0 +1,27 @@
|
||||
/* https://github.com/BelfrySCAD/BOSL2 */
|
||||
include <BOSL2/std.scad>
|
||||
|
||||
bottom_h = 47;
|
||||
figure_w = 19.7;
|
||||
|
||||
plug_h = 5;
|
||||
plug_d = 9;
|
||||
plug_tolerance = 0.1;
|
||||
|
||||
$fn = 150;
|
||||
|
||||
module Head(tolerance) {
|
||||
translate([0,0,plug_h-tolerance])
|
||||
sphere(d=figure_w, anchor=[0,0,-1]);
|
||||
cyl(h=figure_w, d=plug_d-tolerance, anchor=[0,0,-1]);
|
||||
}
|
||||
|
||||
translate([20,0,0])
|
||||
difference() {
|
||||
cyl(h=bottom_h, d=figure_w, chamfer1=0.5, rounding2=6, anchor=[0,0,-1]);
|
||||
translate([0,0,41])
|
||||
Head(0);
|
||||
}
|
||||
|
||||
translate([-20,0,0])
|
||||
Head(plug_tolerance);
|
||||
Binary file not shown.
Reference in New Issue
Block a user