Exhaust adapter

This commit is contained in:
Stefan Thoss
2025-01-04 15:12:39 -08:00
parent 0a735079f2
commit d0b68185bd
4 changed files with 59 additions and 0 deletions
Binary file not shown.
Binary file not shown.

After

Width:  |  Height:  |  Size: 135 KiB

@@ -0,0 +1,59 @@
/* https://github.com/BelfrySCAD/BOSL2 */
include <BOSL2/std.scad>
plate_size = 120;
plate_rounding = 20;
wall_thickness = 2;
hex_hole_size = 4;
hex_spacing = hex_hole_size/2;
pipe_outer_diameter = 100;
pipe_wall_height = 20;
mounting_hole_diameter = 4;
$fn = 80;
assert(plate_size > pipe_outer_diameter+4*wall_thickness, "Plate size too small");
module CylinderCutout() {
cylinder(d=pipe_outer_diameter-2*wall_thickness, h=wall_thickness, center=true);
}
/* Plate */
difference() {
cuboid([plate_size, plate_size, wall_thickness], rounding=plate_rounding, edges="Z");
group() {
CylinderCutout();
/* Mounting holes */
mounting_hole_offset = pipe_outer_diameter/2-plate_rounding/4;
translate([-mounting_hole_offset,-mounting_hole_offset,0])
cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true);
translate([mounting_hole_offset,-mounting_hole_offset,0])
cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true);
translate([-mounting_hole_offset,mounting_hole_offset,0])
cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true);
translate([mounting_hole_offset,mounting_hole_offset,0])
cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true);
}
}
/* Hex holes */
intersection() {
difference() {
cube([plate_size,plate_size,wall_thickness], center=true);
grid_copies(spacing=[sqrt(3)*hex_spacing,hex_spacing], inside=square(plate_size, center=true), stagger=true)
cylinder(d=hex_hole_size, h=wall_thickness, $fn=6, center=true);
}
CylinderCutout();
}
/* Pipe */
translate([0,0,pipe_wall_height/2+wall_thickness/2])
tube(h=pipe_wall_height, od=pipe_outer_diameter, wall=wall_thickness, rounding2=wall_thickness/2, ochamfer1=-min(wall_thickness,5));
Binary file not shown.