diff --git a/exhaust-vent-wall-plate/exhaust-vent-wall-plate.3mf b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.3mf new file mode 100644 index 0000000..7860844 Binary files /dev/null and b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.3mf differ diff --git a/exhaust-vent-wall-plate/exhaust-vent-wall-plate.png b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.png new file mode 100644 index 0000000..bb88169 Binary files /dev/null and b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.png differ diff --git a/exhaust-vent-wall-plate/exhaust-vent-wall-plate.scad b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.scad new file mode 100644 index 0000000..450c79d --- /dev/null +++ b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.scad @@ -0,0 +1,59 @@ +/* https://github.com/BelfrySCAD/BOSL2 */ +include + +plate_size = 120; +plate_rounding = 20; + +wall_thickness = 2; + +hex_hole_size = 4; +hex_spacing = hex_hole_size/2; + +pipe_outer_diameter = 100; +pipe_wall_height = 20; + +mounting_hole_diameter = 4; + +$fn = 80; + +assert(plate_size > pipe_outer_diameter+4*wall_thickness, "Plate size too small"); + +module CylinderCutout() { + cylinder(d=pipe_outer_diameter-2*wall_thickness, h=wall_thickness, center=true); +} + +/* Plate */ +difference() { + cuboid([plate_size, plate_size, wall_thickness], rounding=plate_rounding, edges="Z"); + + group() { + CylinderCutout(); + + /* Mounting holes */ + mounting_hole_offset = pipe_outer_diameter/2-plate_rounding/4; + translate([-mounting_hole_offset,-mounting_hole_offset,0]) + cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true); + translate([mounting_hole_offset,-mounting_hole_offset,0]) + cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true); + translate([-mounting_hole_offset,mounting_hole_offset,0]) + cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true); + translate([mounting_hole_offset,mounting_hole_offset,0]) + cylinder(d=mounting_hole_diameter, h=wall_thickness, center=true); + } +} + +/* Hex holes */ +intersection() { + difference() { + cube([plate_size,plate_size,wall_thickness], center=true); + grid_copies(spacing=[sqrt(3)*hex_spacing,hex_spacing], inside=square(plate_size, center=true), stagger=true) + cylinder(d=hex_hole_size, h=wall_thickness, $fn=6, center=true); + } + + CylinderCutout(); +} + +/* Pipe */ +translate([0,0,pipe_wall_height/2+wall_thickness/2]) + tube(h=pipe_wall_height, od=pipe_outer_diameter, wall=wall_thickness, rounding2=wall_thickness/2, ochamfer1=-min(wall_thickness,5)); + \ No newline at end of file diff --git a/exhaust-vent-wall-plate/exhaust-vent-wall-plate.stl b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.stl new file mode 100644 index 0000000..73d0660 Binary files /dev/null and b/exhaust-vent-wall-plate/exhaust-vent-wall-plate.stl differ