46 lines
1.4 KiB
OpenSCAD
46 lines
1.4 KiB
OpenSCAD
/* https://github.com/BelfrySCAD/BOSL2 */
|
|
include <BOSL2/std.scad>
|
|
|
|
device_w = 24.5;
|
|
device_h = 24.5;
|
|
device_d = 17;
|
|
|
|
cutout_border = 2;
|
|
cable_cutout_rounding = 1;
|
|
|
|
box_t = 2;
|
|
box_rounding = 2;
|
|
device_rounding = 2;
|
|
|
|
hex_plug_diameter = 0.99*15.47; // Slightly reduced from spec of 15.47mm
|
|
hex_plug_short_side = sqrt(3)*(hex_plug_diameter/2);
|
|
hex_plug_depth = 10;
|
|
|
|
$fn = 80;
|
|
|
|
difference() {
|
|
group() {
|
|
/* Main holder */
|
|
translate([0,0,0])
|
|
cuboid([device_w+2*box_t,device_d+2*box_t,device_h+box_t], rounding = box_rounding, except = [TOP,BACK]);
|
|
}
|
|
group() {
|
|
/* Device cutout */
|
|
translate([0,0,box_t])
|
|
cuboid([device_w,device_d,device_h+box_t], rounding = device_rounding, edges = [BOT+LEFT, BOT+RIGHT]);
|
|
|
|
/* Front cutout */
|
|
translate([0,-box_t-2*cutout_border,box_t])
|
|
cuboid([device_w-2*cutout_border, device_d-2*cutout_border, device_h-cutout_border], rounding = box_rounding, edges = [BOT+LEFT, BOT+RIGHT]);
|
|
|
|
/* Plug cutout */
|
|
translate([0,0,-device_h/2])
|
|
cuboid([device_w-2*cutout_border,device_d-2*cutout_border,device_h], rounding = cable_cutout_rounding);
|
|
}
|
|
}
|
|
|
|
/* Hex plug */
|
|
translate([0,hex_plug_depth/2+device_d/2+box_t,hex_plug_short_side/2-device_h/2-box_t/2])
|
|
rotate([-90,0,0])
|
|
cylinder(h = hex_plug_depth, d = hex_plug_diameter, center = true, $fn = 6);
|