Files
2026-07-21 22:04:21 -07:00

64 lines
1.8 KiB
OpenSCAD

/* https://github.com/BelfrySCAD/BOSL2 */
include <BOSL2/std.scad>
include <BOSL2/screws.scad>
lap_height = 127;
lap_depth = 9;
wall_width = 500;
hanger_length = 125;
hanger_diag_length = sqrt(2)*hanger_length;
hanger_width = 20;
hanger_thickness = 7;
hanger_overlap = 20;
hanger_rounding = 2;
hook_hole_diameter = 5;
$fn = 120;
module LapPlank() {
// Define the triangular profile for the siding
// We use a polygon for the wedge shape
path = [[0, 0], [lap_depth, 0], [0, lap_height], [0, 0]];
// Sweep the profile across the width of the wall
linear_extrude(wall_width) polygon(path);
}
module BackPattern() {
rotate([90,0,0])
translate([0,-lap_height/2,-wall_width/2])
ycopies(lap_height, l=wall_width)
LapPlank();
}
module Hanger() {
/* Main beam */
right(lap_depth)
cuboid([hanger_length+hanger_overlap,hanger_width,hanger_thickness], rounding=hanger_rounding, anchor=LEFT);
/* Diag beam */
up(hanger_length) right(lap_depth)rotate([0,45,0])
cuboid([hanger_diag_length,hanger_width,hanger_thickness], rounding=hanger_rounding, anchor=LEFT);
/* Back beam */
down(hanger_overlap)
cuboid([hanger_thickness+lap_depth,hanger_width,hanger_length+2*hanger_overlap], rounding=hanger_rounding, anchor=LEFT+BOTTOM);
}
difference() {
Hanger();
group() {
BackPattern();
translate([hanger_thickness+lap_depth,0,-(hanger_thickness/2+hanger_overlap)/2]) rotate([0,90,0]) screw_hole("#8,2",head="flat",anchor=TOP);
translate([hanger_thickness+lap_depth,0,hanger_length+(hanger_thickness/2+hanger_overlap)/2]) rotate([0,90,0]) screw_hole("#8,2",head="flat",anchor=TOP);
/* Hook hole */
right(hanger_length+hanger_overlap)
zcyl(d=hook_hole_diameter, h=hanger_thickness);
}
}