Files
3d-printer-models/brio-tunnel-block/brio-tunnel-block-striped.scad
2026-11-04 16:50:48 -08:00

80 lines
2.7 KiB
OpenSCAD

// Zebra version of brio-tunnel-block.scad: the block is cut into 8 bands of 5mm
// across its 40mm depth (the dimension that is 40mm tall when the block lies on
// its side) and the bands alternate black/white, so the stripes run over the arch.
// Geometry, chamfering and rounding are identical to brio-tunnel-block.scad; only
// the coloring/slicing is added.
// Colors show in the preview (F5) and in a 3MF export; a plain STL export drops them.
/* https://github.com/BelfrySCAD/BOSL2 */
include <BOSL2/std.scad>
cube_h = 80;
cube_w = 80;
cube_d = 40;
rounding = 2;
oval_cutout_h = 15;
rect_cutout_w = 45;
rect_cutout_h = 65-oval_cutout_h;
// Zebra striping: stripe_n bands of 5mm across the 40mm depth (cube_d),
// alternating between the two stripe colors.
stripe_n = 8;
stripe_w = cube_d / stripe_n; // 5mm
stripe_colors = ["black", "white"];
$fn=150;
// The tunnel block, exactly as in brio-tunnel-block.scad
// (all chamfering and rounding unchanged).
module tunnelblock() {
difference() {
cuboid([cube_w,cube_d,cube_h], rounding=rounding, anchor=[0,0,-1]);
group() {
rotate([90,0,0])
difference() {
cuboid([rect_cutout_w,rect_cutout_h,cube_d], chamfer=-rounding, anchor=[0,-1,0]);
translate([0,rect_cutout_h,0])
cuboid([2*rect_cutout_w,rect_cutout_h,cube_d], anchor=[0,-1,0]);
}
translate([0,0,rect_cutout_h])
resize([0,0,2*oval_cutout_h])
rotate([90,0,0])
cyl(h=cube_d, d=rect_cutout_w, chamfer=-rounding);
}
}
}
// Everything of the block that is *not* between y=y0 and y=y1, as a single
// solid. Cutting the block with one difference() of this union (instead of an
// intersection() with a slab) is what keeps the rounded/chamfered edges at
// y=+/-cube_d/2 intact.
module outside(y0, y1) {
big = 2 * cube_h; // bigger than the block in every direction
union() {
translate([0, (y0-big)/2, cube_h/2])
cube([cube_w + 2*big, big + y0, cube_h + 2*big], center=true);
translate([0, (y1+big)/2, cube_h/2])
cube([cube_w + 2*big, big - y1, cube_h + 2*big], center=true);
}
}
// The block sliced into stripe_n bands along Y, each band colored alternately.
module tunnelblock_striped() {
for (i = [0 : stripe_n-1]) {
y0 = -cube_d/2 + i*stripe_w;
color(stripe_colors[i % len(stripe_colors)])
difference() {
tunnelblock();
outside(y0, y0 + stripe_w);
}
}
}
tunnelblock_striped();
// To render the plain, unstriped block instead, use: tunnelblock();