/* https://github.com/BelfrySCAD/BOSL2 */ include $fn = 150; // Overall pattern dimensions pattern_width = 375; // Total width of pattern (mm) pattern_height = 220; // Total height of pattern (mm) pattern_thickness = 2; // Thickness of the entire pattern (mm) ring_inner_diameter = 38; // Inner diameter of rings (mm) ring_width = 2; // Width of ring walls (mm) line_width = 2; // Width of connecting lines (mm) perimeter_width = 4; // Width of outer perimeter walls (mm) hex_spacing = 45; // Distance between hex centers (mm) ring_outer_radius = (ring_inner_diameter + 2 * ring_width) / 2; module hex_ring_pattern_2d() { union() { // Create outer rectangular perimeter using difference difference() { square([pattern_width, pattern_height], center=true); square([pattern_width - 2*perimeter_width, pattern_height - 2*perimeter_width], center=true); } // Get all valid ring positions positions = get_hex_positions(); // Create rings at all valid positions for (pos = positions) { translate(pos) ring(r=ring_inner_diameter/2, ring_width=ring_width); } // Create all connections create_connections(positions); } } // Function to get all valid hexagonal ring positions function get_hex_positions() = [ for (row = [-8:8]) for (col = [-10:10]) let( x_pos = col * hex_spacing + (row % 2) * hex_spacing/2, y_pos = row * hex_spacing * sin(60), pos = [x_pos, y_pos] ) if (abs(x_pos) + ring_outer_radius <= pattern_width/2 && abs(y_pos) + ring_outer_radius <= pattern_height/2) pos ]; // Create all connections (hex grid + perimeter) module create_connections(positions) { if (len(positions) > 1) { // Hex grid connections for (i = [0:len(positions)-2]) { for (j = [i+1:len(positions)-1]) { pos1 = positions[i]; pos2 = positions[j]; dist = norm(pos2 - pos1); // Connect adjacent rings if (dist > hex_spacing * 0.9 && dist < hex_spacing * 1.1) { connect_rings(pos1, pos2); } } } // Perimeter connections for (pos = positions) { connect_to_edges(pos); } } } // Connect two rings with a line module connect_rings(pos1, pos2) { angle = atan2(pos2[1] - pos1[1], pos2[0] - pos1[0]); start_point = pos1 + [cos(angle), sin(angle)] * (ring_inner_diameter/2); end_point = pos2 - [cos(angle), sin(angle)] * (ring_inner_diameter/2); move((start_point + end_point)/2) rot(angle) square([norm(end_point - start_point), line_width], center=true); } // Connect a ring to nearby perimeter edges module connect_to_edges(pos) { x = pos[0]; y = pos[1]; half_w = pattern_width/2; half_h = pattern_height/2; // Connect to edges if ring is within 1.5 spacing units if (x <= -half_w + hex_spacing * 1.5 && abs(y) <= half_h - perimeter_width) { start = [x - ring_inner_diameter/2, y]; end = [-half_w, y]; move((start + end)/2) square([norm(end - start), line_width], center=true); } if (x >= half_w - hex_spacing * 1.5 && abs(y) <= half_h - perimeter_width) { start = [x + ring_inner_diameter/2, y]; end = [half_w, y]; move((start + end)/2) square([norm(end - start), line_width], center=true); } if (y >= half_h - hex_spacing * 1.5 && abs(x) <= half_w - perimeter_width) { start = [x, y + ring_inner_diameter/2]; end = [x, half_h]; move((start + end)/2) rot(90) square([norm(end - start), line_width], center=true); } if (y <= -half_h + hex_spacing * 1.5 && abs(x) <= half_w - perimeter_width) { start = [x, y - ring_inner_diameter/2]; end = [x, -half_h]; move((start + end)/2) rot(90) square([norm(end - start), line_width], center=true); } } linear_extrude(pattern_thickness) { hex_ring_pattern_2d(); }