include /* https://github.com/BelfrySCAD/BOSL2 */ include include //$fn = 10; // Equation: 216=2*19+2*r*sin(a)+115*cos(a),60.7=2*r-2*r*cos(a)+115*sin(a),a>0,a0 end_length = 19; slope_radius = 91.2005; slope_angle = 23.4085; straight_length = 115; ramp_height = 60.7; ramp_length = 216; turtle_cmds = ["move", end_length, "arcleft", slope_radius, slope_angle, "move", straight_length, "arcright", slope_radius, slope_angle, "move", end_length]; path = turtle(turtle_cmds); difference() { path_extrude(path) track_blueprint(grooves = true, part_chamfers = true, both_sides = true); // Add nest translate([0, track_height, -track_width]) rotate([90, 0, 0]) install_nest(nest_rotate = 0, length = 0); // Corner chamfer start rotate([-90, 0, 0]) for (y = [0, track_width]) { translate([0, y, track_height/2]) rotate([0, 0, 45]) cube([track_chamfer, track_chamfer, track_height], center = true); } // Corner chamfer end translate([0, ramp_height, 0]) rotate([-90, 0, 0]) for (y = [ 0, track_width]) { translate([ramp_length, y, track_height/2]) rotate([0, 0, 45]) cube([track_chamfer, track_chamfer, track_height], center = true); } } // Add plug translate([ramp_length, ramp_height+track_height, -track_width/2]) rotate([90, 0, 0]) track_plug();