/* https://github.com/BelfrySCAD/BOSL2 */ include fan_size = 80; plate_thickness = 2; mounting_hole_offset = 71.5/2; mounting_hole_diameter = 4.5; shroud_length = 25; shroud_thickness = 4; shroud_offset_v = 0; // positive = fan to the bottom shroud_offset_h = 0; // positive = fan to the right fan_diameter = fan_size-2; gpu_width = 18.7; gpu_height = 54.5; gpu_length = 15; gpu_pcb_width = 1.7; gpu_pcb_height = 56.6; gpu_pcb_h_offset = 18.5/2-2.6-1.7/2; gpu_pcb_l_offset = 2; $fn = 150; difference() { group() { /* Plate */ cuboid([fan_size, fan_size, plate_thickness], rounding=mounting_hole_diameter, edges="Z"); /* Shroud outside */ hull() { cylinder(d=fan_diameter, h=plate_thickness, center=true); translate([shroud_offset_h, (gpu_height+shroud_thickness-fan_size)/2+shroud_offset_v, shroud_length]) cube([gpu_width+shroud_thickness, gpu_height+shroud_thickness, shroud_thickness], center=true); } /* Straight piece outside */ translate([shroud_offset_h, (gpu_height+shroud_thickness-fan_size)/2+shroud_offset_v, shroud_length+gpu_length/2]) cube([gpu_width+shroud_thickness, gpu_height+shroud_thickness, gpu_length], center=true); } group() { /* Plate hole */ cylinder(d=fan_diameter-2*shroud_thickness, h=plate_thickness, center=true); /* Shroud inside */ hull() { cylinder(d=fan_diameter-2*shroud_thickness, h=plate_thickness, center=true); translate([shroud_offset_h, (gpu_height+shroud_thickness-fan_size)/2+shroud_offset_v, shroud_length]) cube([gpu_width, gpu_height, shroud_thickness], center=true); } /* Straight piece inside */ translate([shroud_offset_h, (gpu_height+shroud_thickness-fan_size)/2+shroud_offset_v, 0]) { group() { translate([0, 0, shroud_length+gpu_length/2]) cube([gpu_width, gpu_height, gpu_length], center=true); /* PCB cutout */ translate([-gpu_pcb_h_offset, 0, shroud_length+gpu_length/2+gpu_pcb_l_offset]) cube([gpu_pcb_width, gpu_pcb_height, gpu_length-gpu_pcb_l_offset], center=true); } } /* Mounting holes */ for (i = [-1, 1]) { for (j = [-1, 1]) { translate([i * mounting_hole_offset, j * mounting_hole_offset, 0]) cylinder(d=mounting_hole_diameter, h=plate_thickness, center=true); } } } }