/* https://github.com/BelfrySCAD/BOSL2 */ include include lap_height = 127; lap_depth = 9; wall_width = 500; hanger_length = 125; hanger_diag_length = sqrt(2)*hanger_length; hanger_width = 20; hanger_thickness = 7; hanger_overlap = 20; hanger_rounding = 2; hook_hole_diameter = 5; $fn = 120; module LapPlank() { // Define the triangular profile for the siding // We use a polygon for the wedge shape path = [[0, 0], [lap_depth, 0], [0, lap_height], [0, 0]]; // Sweep the profile across the width of the wall linear_extrude(wall_width) polygon(path); } module BackPattern() { rotate([90,0,0]) translate([0,-lap_height/2,-wall_width/2]) ycopies(lap_height, l=wall_width) LapPlank(); } module Hanger() { /* Main beam */ right(lap_depth) cuboid([hanger_length+hanger_overlap,hanger_width,hanger_thickness], rounding=hanger_rounding, anchor=LEFT); /* Diag beam */ up(hanger_length) right(lap_depth)rotate([0,45,0]) cuboid([hanger_diag_length,hanger_width,hanger_thickness], rounding=hanger_rounding, anchor=LEFT); /* Back beam */ down(hanger_overlap) cuboid([hanger_thickness+lap_depth,hanger_width,hanger_length+2*hanger_overlap], rounding=hanger_rounding, anchor=LEFT+BOTTOM); } difference() { Hanger(); group() { BackPattern(); translate([hanger_thickness+lap_depth,0,-(hanger_thickness/2+hanger_overlap)/2]) rotate([0,90,0]) screw_hole("#8,2",head="flat",anchor=TOP); translate([hanger_thickness+lap_depth,0,hanger_length+(hanger_thickness/2+hanger_overlap)/2]) rotate([0,90,0]) screw_hole("#8,2",head="flat",anchor=TOP); /* Hook hole */ right(hanger_length+hanger_overlap) zcyl(d=hook_hole_diameter, h=hanger_thickness); } }