include lap_height = 127; lap_depth = 9; wall_width = 500; ring_outer = 120; ring_inner = 60; ring_thickness = lap_depth + 2; ring_offset = -15; // -15 for left light, -55 for right light screw_diameter = 6.5; screw_center_offset = 45; $fn = 200; module lap_plank() { // Define the triangular profile for the siding // We use a polygon for the wedge shape path = [[0, 0], [lap_depth, 0], [0, lap_height], [0, 0]]; // Sweep the profile across the width of the wall linear_extrude(wall_width) polygon(path); } module back_pattern() { translate([0,-lap_height/2,-wall_width/2]) ycopies(lap_height, l=wall_width) lap_plank(); } difference() { translate([0,ring_offset,0]) difference() { xcyl(l=ring_thickness, d=ring_outer, anchor=LEFT); xcyl(l=ring_thickness, d=ring_inner, anchor=LEFT); } group() { back_pattern(); /* screw holes */ translate([0,ring_offset,0]) rotate([45,0,0]) group() { translate([0,0,screw_center_offset]) xcyl(d=screw_diameter, l=4*ring_thickness); translate([0,0,-screw_center_offset]) xcyl(d=screw_diameter, l=4*ring_thickness); } } }