/* https://github.com/BelfrySCAD/BOSL2 */ include device_w = 24.5; device_h = 24.5; device_d = 17; cutout_border = 2; cable_cutout_rounding = 1; box_t = 2; box_rounding = 2; device_rounding = 2; hex_plug_diameter = 0.99*15.47; // Slightly reduced from spec of 15.47mm hex_plug_short_side = sqrt(3)*(hex_plug_diameter/2); hex_plug_depth = 10; $fn = 80; difference() { group() { /* Main holder */ translate([0,0,0]) cuboid([device_w+2*box_t,device_d+2*box_t,device_h+box_t], rounding = box_rounding, except = [TOP,BACK]); } group() { /* Device cutout */ translate([0,0,box_t]) cuboid([device_w,device_d,device_h+box_t], rounding = device_rounding, edges = [BOT+LEFT, BOT+RIGHT]); /* Front cutout */ translate([0,-box_t-2*cutout_border,box_t]) cuboid([device_w-2*cutout_border, device_d-2*cutout_border, device_h-cutout_border], rounding = box_rounding, edges = [BOT+LEFT, BOT+RIGHT]); /* Plug cutout */ translate([0,0,-device_h/2]) cuboid([device_w-2*cutout_border,device_d-2*cutout_border,device_h], rounding = cable_cutout_rounding); } } /* Hex plug */ translate([0,hex_plug_depth/2+device_d/2+box_t,hex_plug_short_side/2-device_h/2-box_t/2]) rotate([-90,0,0]) cylinder(h = hex_plug_depth, d = hex_plug_diameter, center = true, $fn = 6);