/* https://github.com/BelfrySCAD/BOSL2 */ include device_w = 78; device_h = 130; device_d = 13; bottom_h = 90; front_cutout_offset = 5; cable_cutout_w = 54; cable_cutout_d = 8; cable_cutout_rounding = 1; box_t = 2; box_rounding = 3; device_rounding = 5; monitor_thickness = 30; monitor_holder_h = 30; $fn = 150; difference() { group() { /* Main holder */ translate([0,0,-(device_h-bottom_h+box_t)/2]) cuboid([device_w+2*box_t,device_d+2*box_t,bottom_h+box_t], rounding = box_rounding, except = TOP); /* Back plate */ translate([0,(device_d+box_t)/2,0]) cuboid([device_w-device_rounding,box_t,device_w-device_rounding], rounding = device_rounding, edges="Y"); /* Behind-monitor plate */ translate([0,(device_d+box_t)/2+monitor_thickness,(device_w-device_rounding-monitor_holder_h)/2]) cuboid([device_w-device_rounding,box_t,monitor_holder_h], rounding = device_rounding, edges="Y"); /* Over-monitor holders */ translate([device_w/2-1.5*device_rounding,(device_d+box_t+monitor_thickness)/2,device_w/2-1.5*device_rounding]) rotate([90,0,0]) cylinder(h = monitor_thickness, r = device_rounding, center = true); translate([-(device_w/2-1.5*device_rounding),(device_d+box_t+monitor_thickness)/2,device_w/2-1.5*device_rounding]) rotate([90,0,0]) cylinder(h = monitor_thickness, r = device_rounding, center = true); } group() { /* Device cutout */ translate([0,0,0]) cuboid([device_w, device_d, device_h]); /* Front cutout */ translate([0,-(device_d+box_t)/2,front_cutout_offset]) cuboid([device_w-2*front_cutout_offset,2*box_t,device_h], rounding = device_rounding, edges="Y"); /* Plug cutout */ translate([0,0,-device_h/2]) cuboid([cable_cutout_w,cable_cutout_d,bottom_h], rounding = cable_cutout_rounding); } }