/* https://github.com/BelfrySCAD/BOSL2 */ include include // Outer length of the tray outer_length = 180; // Outer width of the tray outer_width = 80; // Outer height of the tray outer_height = 40; // Thickness of the walls wall_thickness = 3; // [2:10] // Roundness of all outer corners outer_roundness = 3; // Roundness of the long bottom inner corners long_bottom_roundness = 15; // Roundness of all other inner corners corner_roundness = 3; $fn = 80; assert(corner_roundness >= outer_roundness, "Corner roundness must be greater than or equal outer roundness"); assert(long_bottom_roundness <= 0.75*outer_height, "Bottom roundness must be smaller than 75% of height"); assert(long_bottom_roundness < outer_width/2, "Bottom roundness must be smaller than half the width"); difference() { cuboid([outer_width,outer_length,outer_height], rounding=outer_roundness, except=TOP, anchor=CENTER); group() { translate([0,0,outer_height/2]) cuboid([outer_width-wall_thickness,outer_length-wall_thickness,2*(corner_roundness+wall_thickness)], rounding=corner_roundness, edges="Z"); rotate([-90,0,0]) rounded_prism(square([outer_width-wall_thickness,outer_height-wall_thickness]), height=outer_length-wall_thickness, joint_top=corner_roundness, joint_bot=corner_roundness, joint_sides=[corner_roundness,corner_roundness,long_bottom_roundness,long_bottom_roundness], anchor=CENTER, k=0.9, splinesteps=40); } }