Compare commits

..
2 Commits
Author SHA1 Message Date
Stefan Thoss 00307cbd2a RPi wall holder 2025-01-07 10:05:21 -08:00
Stefan Thoss 9bd1b7ac5c OpenSCAD improvements 2025-01-06 20:48:47 -08:00
8 changed files with 108 additions and 33 deletions
@@ -6,7 +6,7 @@ plate_rounding = 20;
wall_thickness = 2; wall_thickness = 2;
hex_hole_size = 4; hex_hole_size = 4; // [4:0.5:20]
hex_spacing = hex_hole_size/2; hex_spacing = hex_hole_size/2;
pipe_outer_diameter = 100; pipe_outer_diameter = 100;
@@ -2,11 +2,19 @@
include <BOSL2/std.scad> include <BOSL2/std.scad>
include <BOSL2/skin.scad> include <BOSL2/skin.scad>
loop_r = 30; // Radius of the hook ends
hook_d = 15; loop_radius = 30;
hook_angle = 145;
straight_l = 85; // Diameter of the hook
flatten_h = hook_d/20; hook_diameter = 15;
// How many degrees should the hook ends bend
hook_angle = 145; // [60:270]
// Length of the straight part
straight_length = 85;
flatten_height = hook_diameter/20;
$fn=80; $fn=80;
@@ -14,44 +22,35 @@ difference() {
/* Hook */ /* Hook */
group() { group() {
/* Start cap */ /* Start cap */
rotate([0,-90,0]) { rotate([0,-90,0])
rotate_extrude(){ rotate_extrude()
intersection(){ intersection(){
circle(d=hook_d); circle(d=hook_diameter);
square(hook_d); square(hook_diameter);
}
}
} }
/* Draw the hook */ /* Draw the hook */
turtle_cmds = ["arcrightto", loop_r, hook_angle, turtle_cmds = ["arcrightto", loop_radius, hook_angle,
"move", straight_l, "move", straight_length,
"arcleftto", loop_r, 0]; "arcleftto", loop_radius, 0];
path = turtle(turtle_cmds, path = turtle(turtle_cmds, state=[0,0], full_state=false);
state=[0,0], path_sweep(circle(d = hook_diameter), path);
full_state=false);
path_sweep(circle(d = hook_d), path);
/* End cap */ /* End cap */
translate(path[len(path) - 1]) { translate(path[len(path) - 1])
rotate([0,90,0]) { rotate([0,90,0])
rotate_extrude(){ rotate_extrude()
intersection(){ intersection(){
circle(d=hook_d); circle(d=hook_diameter);
square(hook_d); square(hook_diameter);
}
}
}
} }
} }
/* Flatten the hook with two cubes */ /* Flatten the hook with two cubes */
group(){ group(){
translate([-4*straight_l+2*loop_r,-2*straight_l+loop_r,(hook_d/2)-flatten_h]) { translate([-4*straight_length+2*loop_radius,-2*straight_length+loop_radius,(hook_diameter/2)-flatten_height])
cube([4*straight_l,2*straight_l,flatten_h]); cube([4*straight_length,2*straight_length,flatten_height]);
} translate([-4*straight_length+2*loop_radius,-2*straight_length+loop_radius,-(hook_diameter/2)])
translate([-4*straight_l+2*loop_r,-2*straight_l+loop_r,-(hook_d/2)]) { cube([4*straight_length,2*straight_length,flatten_height]);
cube([4*straight_l,2*straight_l,flatten_h]);
}
} }
} }
Binary file not shown.

After

Width:  |  Height:  |  Size: 36 KiB

Binary file not shown.
Binary file not shown.
Binary file not shown.

After

Width:  |  Height:  |  Size: 36 KiB

@@ -0,0 +1,76 @@
/* https://github.com/BelfrySCAD/BOSL2 */
include <BOSL2/std.scad>
include <BOSL2/screws.scad>
rpi_mount_hole_x = 58;
rpi_mount_hole_y = 49; // Zero: 23mm, RPi 2-5: 49mm
rpi_mount_hole_padding = 5;
holder_width = 8;
holder_length = rpi_mount_hole_y+2*rpi_mount_hole_padding;
holder_thickness = 5;
wall_width = 65+2*15;
wall_height = 15;
wall_thickness = 3.5;
box_rounding = 3;
hole_wide_diameter = 4.5;
hole_wide_depth = 2.5;
hole_narrow_diameter = 2.75;
hole_narrow_depth = 2.5;
screw_r = 4.6;
screw_back_offset = 0.5;
screw_side_offset = wall_width/4+rpi_mount_hole_x/4+holder_width/4;
$fn = 80;
module ScrewHole() {
rotate([90,-90,0]) {
screw_hole("#8,1/4", head="flat", anchor=TOP);
cylinder(h=screw_back_offset, r=screw_r);
}
}
module Holder() {
cuboid([holder_width,holder_length,holder_thickness], rounding=box_rounding, edges="Z", except=BACK);
}
module HolderHole() {
cylinder(d = hole_narrow_diameter, h = hole_narrow_depth);
translate([0,0,-hole_narrow_depth])
// cylinder(d = hole_wide_diameter, h = hole_wide_depth);
nut_trap_inline(hole_wide_depth, "M2.5", spin=90, $slop=0.2);
}
difference() {
/* Wall part */
cuboid([wall_width,wall_thickness,wall_height], rounding=box_rounding, edges="Y");
/* Screw holes */
translate([screw_side_offset,-wall_thickness/2,0])
ScrewHole();
translate([-screw_side_offset,-wall_thickness/2,0])
ScrewHole();
}
/* Holders */
difference() {
group() {
translate([rpi_mount_hole_x/2,-wall_thickness/2-holder_length/2,holder_thickness/2-wall_height/2])
Holder();
translate([-rpi_mount_hole_x/2,-wall_thickness/2-holder_length/2,holder_thickness/2-wall_height/2])
Holder();
}
group() {
translate([rpi_mount_hole_x/2,-wall_thickness/2-rpi_mount_hole_padding,holder_thickness/2-wall_height/2])
HolderHole();
translate([rpi_mount_hole_x/2,-wall_thickness/2-rpi_mount_hole_padding-rpi_mount_hole_y,holder_thickness/2-wall_height/2])
HolderHole();
translate([-rpi_mount_hole_x/2,-wall_thickness/2-rpi_mount_hole_padding,holder_thickness/2-wall_height/2])
HolderHole();
translate([-rpi_mount_hole_x/2,-wall_thickness/2-rpi_mount_hole_padding-rpi_mount_hole_y,holder_thickness/2-wall_height/2])
HolderHole();
}
}
Binary file not shown.