diff --git a/README.md b/README.md index d574999..968302d 100644 --- a/README.md +++ b/README.md @@ -34,6 +34,7 @@ Model files: * buffer-stops-v2.scad * train_tracks_generator.scad * turntable.scad +* ascending_fireplace.scad ## brio-tunnel-block diff --git a/brio-tracks/ascending-fireplace.3mf b/brio-tracks/ascending-fireplace.3mf new file mode 100644 index 0000000..30f0fc9 Binary files /dev/null and b/brio-tracks/ascending-fireplace.3mf differ diff --git a/brio-tracks/ascending_fireplace.scad b/brio-tracks/ascending_fireplace.scad new file mode 100644 index 0000000..ca4f897 --- /dev/null +++ b/brio-tracks/ascending_fireplace.scad @@ -0,0 +1,74 @@ +include + +/* https://github.com/BelfrySCAD/BOSL2 */ +include +include + +//$fn = 10; + +// Equation: 144=2*12+2*117.168*sin(a)+l*cos(a),21=2*117.168-2*117.168*cos(a)+l*sin(a),a>0,a0 + +end_length = 12; // Same as normal ascending track +slope_radius = 117.168; // Same as normal ascending track +slope_angle = 12.5681; // Calculated based on above equation +straight_length = 70.7028; // Calculated based on above equation +ramp_height = 21; // Difference between 3 Brio bridges tall and fireplace +ramp_length = 144; // Length of an A piece + +module tall_nest() { + translate([0, track_width/2, -track_height/2]) + scale([1,1,2]) + track_nest(); + translate([0, track_width/2, track_height/2 - cc]) + rotate([0, 0, 45]) + cube([track_nest_neck_width, + track_nest_neck_width, + track_height + 2*cc], + center = true); +} + +turtle_cmds = ["move", end_length, + "arcleft", slope_radius, slope_angle, + "move", straight_length, + "arcright", slope_radius, slope_angle, + "move", end_length]; +path = turtle(turtle_cmds); + +difference() { + path_extrude(path) + track_blueprint(grooves = true, part_chamfers = true, both_sides = true); + + // Add nest + translate([0, track_height, -track_width]) + rotate([90, 0, 0]) + tall_nest(); + + // Corner chamfer start + rotate([-90, 0, 0]) + for (y = [0, track_width]) { + translate([0, y, track_height/2]) + rotate([0, 0, 45]) + cube([track_chamfer, + track_chamfer, + track_height], + center = true); + } + + // Corner chamfer end + translate([0, ramp_height, 0]) + rotate([-90, 0, 0]) + for (y = [ 0, track_width]) { + translate([ramp_length, y, track_height/2]) + rotate([0, 0, 45]) + cube([track_chamfer, + track_chamfer, + track_height], + center = true); + } + +} + +// Add plug +translate([ramp_length, ramp_height+track_height, -track_width/2]) + rotate([90, 0, 0]) + track_plug(); diff --git a/brio-tracks/ascending_fireplace.stl b/brio-tracks/ascending_fireplace.stl new file mode 100644 index 0000000..d67172c Binary files /dev/null and b/brio-tracks/ascending_fireplace.stl differ