Fix Brio Bridge track alignment

This commit is contained in:
Stefan Thoss
2026-02-18 22:04:50 -08:00
parent 76fb9d0afe
commit a82d2484f7
4 changed files with 14 additions and 14 deletions
Binary file not shown.
Binary file not shown.
+13 -13
View File
@@ -1,8 +1,10 @@
/* https://github.com/BelfrySCAD/BOSL2 */
include <BOSL2/std.scad>
track_tolerance = 2; // Additional space to the tracks' side to allow for better fit
/* Brio variables, this file copies all Brio information rather than importing them */
track_width = 40;
track_width = 40 + track_tolerance;
track_height = 12;
track_well_depth = 2.9;
track_well_width_top = 6.75;
@@ -32,21 +34,18 @@ tr_co_w = 0.75 * (track_well_spacing-track_well_width_top);
cc = 0.001;
switch_cut_ext = 1;
track_tolerance = 2; // Total space to the tracks' side to allow for better fit
bridge_height = 61; // Height below the track
bridge_length = 144;
bridge_inner_width = track_width + track_tolerance; // Width between the side supports
side_width = 6;
total_width = bridge_inner_width + 2 * side_width;
total_width = track_width + 2 * side_width;
track_support_height = 3.5; // Thickness of the plank below the track
track_support_overhang = 6;
track_support_width = bridge_inner_width + side_width;
track_support_width = track_width + side_width;
tunnel_rounding = 10;
tunnel_width = track_width + track_tolerance; // Double: 2 * track_width + track_tolerance + 6
tunnel_width = track_width; // Double: 2 * track_width - track_tolerance + 6
tunnel_height = bridge_height + 3;
$fn=150;
@@ -87,12 +86,13 @@ module track(length = 144,
// Track shape blueprint
module track_blueprint(grooves = true, both_sides = false, part_chamfers = true) {
difference() {
square([bridge_inner_width, track_height]);
square([track_width, track_height]);
// Corner champers
if (part_chamfers) {
part_chamfers();
}
// Rail grooves
if (grooves)
if (both_sides) grooves(true);
@@ -171,7 +171,7 @@ module track_nest(radius = track_nest_radius,
translate([neck_l-cc, 0, 0])
rotate([0, 0, 180]) {
rotate_extrude(angle = 360) {
#polygon([[0, -cc],
polygon([[0, -cc],
[radius + track_chamfer/2, -cc],
[radius, track_chamfer/2],
[radius, track_height - track_chamfer/2],
@@ -195,7 +195,7 @@ module side() {
difference() {
group() {
translate([-bridge_length/2,-bridge_inner_width/2,bridge_height]) {
translate([-bridge_length/2,-track_width/2,bridge_height]) {
track(length = bridge_length,
end1 = "nest",
end2 = "plug",
@@ -204,12 +204,12 @@ difference() {
both_sides = false);
// Plank below the track to support bridges on both sides
translate([bridge_length/2,bridge_inner_width/2,-track_support_height/2])
translate([bridge_length/2,track_width/2,-track_support_height/2])
cuboid([bridge_length+2*track_support_overhang,track_support_width,track_support_height], chamfer=track_chamfer/sqrt(2));
}
fwd(bridge_inner_width/2) side();
rotate([0,0,180]) fwd(bridge_inner_width/2) side();
fwd(track_width/2) side();
rotate([0,0,180]) fwd(track_width/2) side();
}
// Tunnel
Binary file not shown.