OpenSCAD improvements

This commit is contained in:
Stefan Thoss
2025-01-06 20:48:47 -08:00
parent 8b602eaa6a
commit 9bd1b7ac5c
2 changed files with 32 additions and 33 deletions
@@ -2,11 +2,19 @@
include <BOSL2/std.scad>
include <BOSL2/skin.scad>
loop_r = 30;
hook_d = 15;
hook_angle = 145;
straight_l = 85;
flatten_h = hook_d/20;
// Radius of the hook ends
loop_radius = 30;
// Diameter of the hook
hook_diameter = 15;
// How many degrees should the hook ends bend
hook_angle = 145; // [60:270]
// Length of the straight part
straight_length = 85;
flatten_height = hook_diameter/20;
$fn=80;
@@ -14,44 +22,35 @@ difference() {
/* Hook */
group() {
/* Start cap */
rotate([0,-90,0]) {
rotate_extrude(){
rotate([0,-90,0])
rotate_extrude()
intersection(){
circle(d=hook_d);
square(hook_d);
circle(d=hook_diameter);
square(hook_diameter);
}
}
}
/* Draw the hook */
turtle_cmds = ["arcrightto", loop_r, hook_angle,
"move", straight_l,
"arcleftto", loop_r, 0];
path = turtle(turtle_cmds,
state=[0,0],
full_state=false);
path_sweep(circle(d = hook_d), path);
turtle_cmds = ["arcrightto", loop_radius, hook_angle,
"move", straight_length,
"arcleftto", loop_radius, 0];
path = turtle(turtle_cmds, state=[0,0], full_state=false);
path_sweep(circle(d = hook_diameter), path);
/* End cap */
translate(path[len(path) - 1]) {
rotate([0,90,0]) {
rotate_extrude(){
translate(path[len(path) - 1])
rotate([0,90,0])
rotate_extrude()
intersection(){
circle(d=hook_d);
square(hook_d);
circle(d=hook_diameter);
square(hook_diameter);
}
}
}
}
}
/* Flatten the hook with two cubes */
group(){
translate([-4*straight_l+2*loop_r,-2*straight_l+loop_r,(hook_d/2)-flatten_h]) {
cube([4*straight_l,2*straight_l,flatten_h]);
}
translate([-4*straight_l+2*loop_r,-2*straight_l+loop_r,-(hook_d/2)]) {
cube([4*straight_l,2*straight_l,flatten_h]);
}
translate([-4*straight_length+2*loop_radius,-2*straight_length+loop_radius,(hook_diameter/2)-flatten_height])
cube([4*straight_length,2*straight_length,flatten_height]);
translate([-4*straight_length+2*loop_radius,-2*straight_length+loop_radius,-(hook_diameter/2)])
cube([4*straight_length,2*straight_length,flatten_height]);
}
}