New Brio bridge
This commit is contained in:
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 13 KiB |
@@ -0,0 +1,220 @@
|
||||
/* https://github.com/BelfrySCAD/BOSL2 */
|
||||
include <BOSL2/std.scad>
|
||||
|
||||
/* Brio variables, this file copies all Brio information rather than importing them */
|
||||
track_width = 40;
|
||||
track_height = 12;
|
||||
track_well_depth = 2.9;
|
||||
track_well_width_top = 6.75;
|
||||
track_well_width_bottom = 4.75;
|
||||
track_well_spacing = 25.7;
|
||||
track_chamfer = 1.5;
|
||||
brio_track_plug_radius = 6; // 6.25
|
||||
brio_track_plug_radius_ext = 6.25; // 6.5 for a dog-bone with springy plug
|
||||
brio_track_plug_neck_width = 6; // 6.1
|
||||
brio_track_plug_neck_length = 18-brio_track_plug_radius; // 12
|
||||
brio_track_plug_txt = "B";
|
||||
brio_track_nest_radius = 6.5; // 6.4
|
||||
brio_track_nest_neck_width = 7.3; // 6.3
|
||||
brio_track_nest_neck_length = 18-brio_track_nest_radius; // 12
|
||||
brio_track_nest_txt = "B";
|
||||
track_plug_radius = brio_track_plug_radius;
|
||||
track_plug_radius_ext = brio_track_plug_radius_ext;
|
||||
track_plug_neck_width = brio_track_plug_neck_width;
|
||||
track_plug_neck_length = brio_track_plug_neck_length;
|
||||
track_plug_txt = brio_track_plug_txt;
|
||||
track_nest_radius = brio_track_nest_radius;
|
||||
track_nest_neck_width = brio_track_nest_neck_width;
|
||||
track_nest_neck_length = brio_track_nest_neck_length;
|
||||
track_nest_txt = brio_track_nest_txt;
|
||||
tr_wl_w_stick_out = (track_well_width_top-track_well_width_bottom)/2;
|
||||
tr_co_w = 0.75 * (track_well_spacing-track_well_width_top);
|
||||
cc = 0.001;
|
||||
switch_cut_ext = 1;
|
||||
|
||||
bridge_height = 61; // Height below the track
|
||||
bridge_length = 144;
|
||||
|
||||
side_width = 6;
|
||||
total_width = track_width + 2 * side_width;
|
||||
|
||||
track_support_height = 3.5; // Thickness of the plank below the track
|
||||
track_support_overhang = 6;
|
||||
track_support_width = track_width + side_width;
|
||||
|
||||
tunnel_rounding = 10;
|
||||
tunnel_width = track_width + side_width;
|
||||
tunnel_height = bridge_height + 3;
|
||||
|
||||
$fn=150;
|
||||
|
||||
// STRAIGHT TRACK GENERATOR MODULE
|
||||
module track(length = 144,
|
||||
end1 = "nest",
|
||||
end2 = "plug",
|
||||
part_chamfers = true,
|
||||
grooves = true,
|
||||
both_sides = false) {
|
||||
b = track_nest_neck_length + track_nest_radius;
|
||||
|
||||
difference() {
|
||||
rotate([90, 0, 90])
|
||||
linear_extrude(length)
|
||||
track_blueprint(grooves = grooves,
|
||||
part_chamfers = part_chamfers,
|
||||
both_sides = both_sides);
|
||||
|
||||
if (end1 == "nest") {
|
||||
install_nest(nest_rotate = 0, length = 0);
|
||||
}
|
||||
if (end2 == "nest") {
|
||||
install_nest(nest_rotate = 180, length = length);
|
||||
}
|
||||
} //main difference
|
||||
|
||||
// Generating plugs
|
||||
if (end1 == "plug") {
|
||||
install_plug(180, 0);
|
||||
}
|
||||
if (end2 == "plug") {
|
||||
install_plug(0, length);
|
||||
}
|
||||
}
|
||||
|
||||
// Track shape blueprint
|
||||
module track_blueprint(grooves = true, both_sides = false, part_chamfers = true) {
|
||||
difference() {
|
||||
square([track_width, track_height]);
|
||||
|
||||
// Corner champers
|
||||
if (part_chamfers) {
|
||||
part_chamfers();
|
||||
}
|
||||
// Rail grooves
|
||||
if (grooves)
|
||||
if (both_sides) grooves(true);
|
||||
else grooves(false);
|
||||
} //difference
|
||||
}
|
||||
|
||||
// Helping module used for generation of track grooves
|
||||
module grooves(both_sides = false) {
|
||||
for (x = [-track_well_spacing/2, track_well_spacing/2]) {
|
||||
translate([track_width/2+x, track_height-track_well_depth+cc, 0])
|
||||
rail_well();
|
||||
if (both_sides) {
|
||||
translate([track_width/2+x, track_well_depth-cc, 0])
|
||||
rotate([0, 0, 180]) rail_well();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Helping function which defines a grove shape
|
||||
module rail_well() {
|
||||
translate([-track_well_width_bottom/2, 0, 0])
|
||||
polygon([[0, 0],
|
||||
[track_well_width_bottom, 0],
|
||||
[track_well_width_bottom+tr_wl_w_stick_out, track_well_depth],
|
||||
[-tr_wl_w_stick_out, track_well_depth]]);
|
||||
}
|
||||
|
||||
// Helping module for track() module - installs a plug
|
||||
module install_plug(plug_rotate = 180, length = 0) {
|
||||
translate([length, track_width/2, 0])
|
||||
rotate([0, 0, plug_rotate])
|
||||
track_plug();
|
||||
|
||||
}
|
||||
|
||||
// Helping module for track() module - installs a nest
|
||||
module install_nest(nest_rotate = 180, length = 0) {
|
||||
translate([length, track_width/2, 0])
|
||||
rotate([0, 0, nest_rotate])
|
||||
track_nest();
|
||||
translate([length, track_width/2, track_height/2 - cc])
|
||||
rotate([0, 0, 45])
|
||||
cube([track_nest_neck_width,
|
||||
track_nest_neck_width,
|
||||
track_height + 2*cc],
|
||||
center = true);
|
||||
}
|
||||
|
||||
// Module track_plug() is used by multiple other modules for generating
|
||||
// a plug at a desired track ending
|
||||
module track_plug(radius = track_plug_radius,
|
||||
neck_w = track_plug_neck_width,
|
||||
neck_l = track_plug_neck_length){
|
||||
|
||||
translate([neck_l, 0, 0])
|
||||
rotate([0, 0, 180]) {
|
||||
rotate_extrude(angle = 360) {
|
||||
polygon([[0, 0],
|
||||
[radius - track_chamfer/2, 0],
|
||||
[radius, track_chamfer/2],
|
||||
[radius, track_height - track_chamfer/2],
|
||||
[radius - track_chamfer/2, track_height],
|
||||
[0, track_height]]);
|
||||
}
|
||||
translate([0, -neck_w/2, 0])
|
||||
cube([neck_l, neck_w, track_height]);
|
||||
}
|
||||
}
|
||||
|
||||
// Module track_nest() is used by multiple other modules for generating
|
||||
// a nest at a desired track ending
|
||||
module track_nest(radius = track_nest_radius,
|
||||
neck_w = track_nest_neck_width,
|
||||
neck_l = track_nest_neck_length) {
|
||||
translate([neck_l-cc, 0, 0])
|
||||
rotate([0, 0, 180]) {
|
||||
rotate_extrude(angle = 360) {
|
||||
#polygon([[0, -cc],
|
||||
[radius + track_chamfer/2, -cc],
|
||||
[radius, track_chamfer/2],
|
||||
[radius, track_height - track_chamfer/2],
|
||||
[radius + track_chamfer/2, track_height + 2*cc],
|
||||
[0, track_height + 2* cc]]);
|
||||
}
|
||||
translate([0, -neck_w/2, -cc])
|
||||
difference() {
|
||||
cube([neck_l, neck_w, track_height + 2*cc]);
|
||||
translate([0, 0, 0]) {
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module side() {
|
||||
translate([0,-side_width/2,bridge_height/2+track_height/2])
|
||||
cuboid([bridge_length,side_width,bridge_height+track_height], chamfer=track_chamfer/sqrt(2), except=[TOP+BACK,TOP+LEFT,TOP+RIGHT,BACK+LEFT,BACK+RIGHT]);
|
||||
}
|
||||
|
||||
difference() {
|
||||
group() {
|
||||
translate([-bridge_length/2,-track_width/2,bridge_height]) {
|
||||
track(length = bridge_length,
|
||||
end1 = "nest",
|
||||
end2 = "plug",
|
||||
part_chamfers = false,
|
||||
grooves = true,
|
||||
both_sides = false);
|
||||
|
||||
// Plank below the track to support bridges on both sides
|
||||
translate([bridge_length/2,track_width/2,-track_support_height/2])
|
||||
cuboid([bridge_length+2*track_support_overhang,track_support_width,track_support_height], chamfer=track_chamfer/sqrt(2));
|
||||
}
|
||||
|
||||
fwd(track_width/2) side();
|
||||
rotate([0,0,180]) fwd(track_width/2) side();
|
||||
}
|
||||
|
||||
// Tunnel
|
||||
group() {
|
||||
// The +0.1 is a hack to fight some rendering issues in OpenSCAD
|
||||
up(tunnel_height/2) rotate([90,0,0]) cuboid([tunnel_width-2*tunnel_rounding,tunnel_height,total_width + 0.1], chamfer=-track_chamfer/sqrt(2), edges="X");
|
||||
up(tunnel_height/2-tunnel_rounding/2) rotate([90,0,0]) cuboid([tunnel_width,tunnel_height-tunnel_rounding,total_width + 0.1], chamfer=-track_chamfer/sqrt(2), edges="Y");
|
||||
translate([tunnel_width/2-tunnel_rounding,0,tunnel_height-tunnel_rounding]) ycyl(h=total_width + 0.1, r=tunnel_rounding, chamfer=-track_chamfer/sqrt(2));
|
||||
translate([-(tunnel_width/2-tunnel_rounding),0,tunnel_height-tunnel_rounding]) ycyl(h=total_width + 0.1, r=tunnel_rounding, chamfer=-track_chamfer/sqrt(2));
|
||||
}
|
||||
}
|
||||
Binary file not shown.
Reference in New Issue
Block a user