Update Nespresso hex design
This commit is contained in:
@@ -0,0 +1,119 @@
|
||||
/* https://github.com/BelfrySCAD/BOSL2 */
|
||||
include <BOSL2/std.scad>
|
||||
|
||||
$fn = 150;
|
||||
|
||||
pattern_width = 375; // Total width of pattern (mm)
|
||||
pattern_height = 220; // Total height of pattern (mm)
|
||||
pattern_thickness = 4; // Thickness of the entire pattern (mm)
|
||||
ring_inner_diameter = 38; // Inner diameter of rings (mm)
|
||||
ring_width = 2; // Width of ring walls (mm)
|
||||
line_width = 2; // Width of connecting lines (mm)
|
||||
perimeter_width = 4; // Width of outer perimeter walls (mm)
|
||||
hex_spacing = 45; // Distance between hex centers (mm)
|
||||
|
||||
ring_outer_radius = (ring_inner_diameter + 2 * ring_width) / 2;
|
||||
|
||||
module hex_ring_pattern_2d() {
|
||||
union() {
|
||||
// Create outer rectangular perimeter using difference
|
||||
difference() {
|
||||
square([pattern_width, pattern_height], center=true);
|
||||
square([pattern_width - 2*perimeter_width, pattern_height - 2*perimeter_width], center=true);
|
||||
}
|
||||
|
||||
// Get all valid ring positions
|
||||
positions = get_hex_positions();
|
||||
|
||||
// Create rings at all valid positions
|
||||
for (pos = positions) {
|
||||
translate(pos) ring(r=ring_inner_diameter/2, ring_width=ring_width);
|
||||
}
|
||||
|
||||
// Create all connections
|
||||
create_connections(positions);
|
||||
}
|
||||
}
|
||||
|
||||
// Function to get all valid hexagonal ring positions
|
||||
function get_hex_positions() = [
|
||||
for (row = [-8:8])
|
||||
for (col = [-10:10]) let(
|
||||
x_pos = col * hex_spacing + (row % 2) * hex_spacing/2,
|
||||
y_pos = row * hex_spacing * sin(60),
|
||||
pos = [x_pos, y_pos]
|
||||
)
|
||||
if (abs(x_pos) + ring_outer_radius <= pattern_width/2 &&
|
||||
abs(y_pos) + ring_outer_radius <= pattern_height/2)
|
||||
pos
|
||||
];
|
||||
|
||||
// Create all connections (hex grid + perimeter)
|
||||
module create_connections(positions) {
|
||||
if (len(positions) > 1) {
|
||||
// Hex grid connections
|
||||
for (i = [0:len(positions)-2]) {
|
||||
for (j = [i+1:len(positions)-1]) {
|
||||
pos1 = positions[i];
|
||||
pos2 = positions[j];
|
||||
dist = norm(pos2 - pos1);
|
||||
|
||||
// Connect adjacent rings
|
||||
if (dist > hex_spacing * 0.9 && dist < hex_spacing * 1.1) {
|
||||
connect_rings(pos1, pos2);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Perimeter connections
|
||||
for (pos = positions) {
|
||||
connect_to_edges(pos);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Connect two rings with a line
|
||||
module connect_rings(pos1, pos2) {
|
||||
angle = atan2(pos2[1] - pos1[1], pos2[0] - pos1[0]);
|
||||
start_point = pos1 + [cos(angle), sin(angle)] * (ring_inner_diameter/2);
|
||||
end_point = pos2 - [cos(angle), sin(angle)] * (ring_inner_diameter/2);
|
||||
|
||||
move((start_point + end_point)/2)
|
||||
rot(angle)
|
||||
square([norm(end_point - start_point), line_width], center=true);
|
||||
}
|
||||
|
||||
// Connect a ring to nearby perimeter edges
|
||||
module connect_to_edges(pos) {
|
||||
x = pos[0]; y = pos[1];
|
||||
half_w = pattern_width/2; half_h = pattern_height/2;
|
||||
|
||||
// Connect to edges if ring is within 1.5 spacing units
|
||||
if (x <= -half_w + hex_spacing * 1.5 && abs(y) <= half_h - perimeter_width) {
|
||||
start = [x - ring_inner_diameter/2, y];
|
||||
end = [-half_w, y];
|
||||
move((start + end)/2) square([norm(end - start), line_width], center=true);
|
||||
}
|
||||
|
||||
if (x >= half_w - hex_spacing * 1.5 && abs(y) <= half_h - perimeter_width) {
|
||||
start = [x + ring_inner_diameter/2, y];
|
||||
end = [half_w, y];
|
||||
move((start + end)/2) square([norm(end - start), line_width], center=true);
|
||||
}
|
||||
|
||||
if (y >= half_h - hex_spacing * 1.5 && abs(x) <= half_w - perimeter_width) {
|
||||
start = [x, y + ring_inner_diameter/2];
|
||||
end = [x, half_h];
|
||||
move((start + end)/2) rot(90) square([norm(end - start), line_width], center=true);
|
||||
}
|
||||
|
||||
if (y <= -half_h + hex_spacing * 1.5 && abs(x) <= half_w - perimeter_width) {
|
||||
start = [x, y - ring_inner_diameter/2];
|
||||
end = [x, -half_h];
|
||||
move((start + end)/2) rot(90) square([norm(end - start), line_width], center=true);
|
||||
}
|
||||
}
|
||||
|
||||
linear_extrude(pattern_thickness) {
|
||||
hex_ring_pattern_2d();
|
||||
}
|
||||
Reference in New Issue
Block a user